Aeroflex Test Solutions
Chinese flag French flag German flag Japanese flag Spanish flag

request quotefree newsletterContact UsQuestions/Comments

9102 Hand-Held Spectrum Analyzer (100 kHz to 4 GHz)

Portable Spectrum Analyzer Designed for Scalar Network and Spectrum Analysis
Aeroflex's 9102 Hand-Held Spectrum Analyzer is a multifunction instrument designed for lab and field applications concerning scalar network and spectrum analysis, including cable and antenna measurements and EMC pre-qualification tests. The basic 9102 has a frequency range of 100 kHz to 4 GHz and a resolution bandwidth (RBW) of an exceptional 1 kHz. An optional frequency extension allows measurements up to 7.5 GHz. The 9102 is small in size and weight, with a large, bright display and easy-to-use menu structure.

  • Portable, full-featured spectrum analyzer ranging from 100 kHz to 4 GHz (or optionally 7.5 GHz)
  • VSWR and DTF measurements supporting antenna installation and verification (option)
  • Tracking generator option enables cable measurements in the field
  • Radiation measurements of base stations and broadcast stations (EMF option)
  • Prequalification for EMC (electromagnetic compatibility) tests
  • Displayed average noise level at -117 dBm
  • Dynamic range of 70 dB
  • Exceptional 1 kHz resolution bandwidth (RBW)
  • VSWR, DTF, EMF measurement options
  • Scalar network analysis (amplifier gain over frequency or filter characteristics) and antenna measurements
  • Prequalification for EMC (electromagnetic compatibility) tests

Options Provide Specific Solutions and Applications
The 9102 offers a vast range of options developed for specific applications. For example, a tracking generator option supporting cable measurements, and a reflection measurement option are available. The flexibility these options provide ensures that the 9102 is an affordable solution, not one that includes unneeded, more expensive features.

Accessories

1205 RF Probe 20dB

Unique and light-weight probe for RF fault tracking
The 1205 5RF Probe 20 dB is a passive 10:1 RF voltage probe with a 50 Volt DC block built in. It has been designed to allow users of RF test equipment to use standard signal tracing techniques. The probe makes it possible to conveniently and accurately monitor or inject signals up to 4 GHz into RF circuits without significantly loading or detuning them.The probe comes with interchangeable ground clips, a tip extension and an N adapter. That's why the RF probe is suitable for a wide range of applications.

  • Bandwidth: 100 kHz to 4 GHz
  • Low Distortion, Passive RF Design
  • Light RF Loading Characteristics
  • Internal 50 V DC Block
  • 10:1 Voltage Ratio
  • Rugged Design

1207 Inductive Probe

An accessory to Aeroflex's 9102 Hand-Held Spectrum Analyzer, the 1207 Inductive Probe is a magnetic field probe designed for taking RF measurements without requiring physical contact to the PCB. The 1207 is ideal for mobile phone service, for performing fast EMC measurements, and can be used in all R&D applications.

The 1207 is able to pick up signals from 10 MHz up to 6 GHz using the magnetic field emitted by ASICs or PCBs. With this measurement method, users do not affect the circuit board, but are still able to measure the frequency. For signals with low power, a 20 dB amplifier is integrated in the housing.

  • Inductive probe available for contactless measurements
  • Large frequency range: 50 MHz to 4 GHz specified, 10 MHz to 6 GHz usable
  • Integrated 20 dB amplifier; for measuring lowest field strength
  • Powered by the 9102's Multi Port
  • High quality RF cable with N connector
  • Solid, small housing
  • Contactless measurements







Contact Us